Honda Odyssey Extension HarnessesHA8025–HA8033 & HA8041–HA8043
Vantage Mobility
Page 1
Table of Contents
HA8025 – A-Pillar 8-Pin .......................... 3
HA8026 – Passenger Schlepp Extension Harness (22-Pin) .......................... 4 HA8027 – Passenger Schlepp Harness (8-Pin) .......................... 5
HA8028 – Impact Sensor Harness (4-Pin) .......................... 6
HA8029 – Center Extension Harness (20-Pin) .......................... 7
HA8030 – Center Extension Harness (24-Pin) .......................... 8
HA8031 – Extension, Passenger A-Pillar (5-Pin) .......................... 9
HA8032 – Extension, Passenger A-Pillar (25-Pin) .......................... 10
HA8033 – Center Extension Harness (34-Pin) .......................... 11
HA8041 – Center Extension Harness (18-Pin, Rev A) .......................... 12 HA8042 – Center Extension Harness (18-Pin, Rev B) .......................... 13 HA8043 – Passenger A-Pillar Harness (22-Pin) .......................... 14
Page 2
Harness: HA8025 – A-Pillar 8-Pin
Drawing No: HA8025
Vehicle: Odyssey
Date: 08/11/2020
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Item | Part Number | Description | Manufacturer / Part Number | Qty |
1 | EL3495 | Connector, Female 8 Pin | Yazaki 7186-8847 | 1 |
1.1 | EL3451 | Terminal, Male 16 GA | Yazaki 7114-7387-02 | 3 |
2 | EL3496 | Connector, Male 8 Pin | Yazaki 7187-8847 | 1 |
2.1 | EL3454 | Terminal, Female | Yazaki 7116-7390-02 | 3 |
4 | IM3066 | Tape, Electric, BLK, 3/4 in x 60FT | - | 12 in |
Wire BOM:
Page 3
Item | Part Number | Description | Length |
1 | EL2224 | Wire, 16GA RED/YELLOW TXL | 30 in |
2 | EL2385 | Wire, 16GA VIOLET TXL | 30 in |
3 | EL2484 | Wire, 16GA BLACK TXL | 30 in |
Page 4
Harness: HA8026 – Passenger Schlepp Extension Harness (22-Pin)
Drawing No: HA8026
Vehicle: Odyssey
Date: 08/10/2020
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 5
Harness: HA8027 – Passenger Schlepp Harness (8-Pin)
Drawing No: HA8027
Vehicle: Odyssey
Date: 12/13/2019
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 6
Harness: HA8028 – Impact Sensor Harness (4-Pin)
Drawing No: HA8028
Vehicle: Odyssey
Date: 12/13/2019
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 7
Harness: HA8029 – Center Extension Harness (20-Pin)
Drawing No: HA8029
Vehicle: Odyssey
Date: 08/04/2020
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 8
Harness: HA8030 – Center Extension Harness (24-Pin)
Drawing No: HA8030
Vehicle: Odyssey
Date: 08/04/2020
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 9
Harness: HA8031 – Extension, Passenger A-Pillar (5-Pin)
Drawing No: HA8031
Vehicle: Odyssey
Date: 12/13/2019
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 10
Harness: HA8032 – Extension, Passenger A-Pillar (25-Pin)
Drawing No: HA8032
Vehicle: Odyssey
Date: 12/10/2019
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 11
Harness: HA8033 – Center Extension Harness (34-Pin)
Drawing No: HA8033
Vehicle: Odyssey
Date: 07/10/2017
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 12
Harness: HA8041 – Center Extension Harness (18-Pin, Rev A)
Drawing No: HA8041
Vehicle: Odyssey
Date: 08/05/2020
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 13
Harness: HA8042 – Center Extension Harness (18-Pin, Rev B)
Drawing No: HA8042
Vehicle: Odyssey
Date: 10/13/2020
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 14
Harness: HA8043 – Passenger A-Pillar Harness (22-Pin)
Drawing No: HA8043
Vehicle: Odyssey
Date: 08/06/2020
Assembly Notes:
- Refer to original engineering drawing for specific notes and tolerances.
- This harness is under strict revision control and must not be altered without approval.
Component BOM:
Refer to schematic for part numbers and quantities used.
Page 15
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article